Table of Contents
Advertisement
v You can turn off the server from the operating system, if your operating system
v You can press the power-control button to start an orderly shutdown of the
v If the operating system stops functioning, you can press and hold the
v If the server is installed in a static partition, pressing the power-control button on
v The server can be turned off from the Remote Supervisor Adapter II SlimLine
v If the Wake on LAN feature turned on the server, the Wake on LAN feature can
v You can turn off the server through a request from the service processor.
36
IBM System x3950 Type 8872 and System x3950 E Type 8874: Installation Guide
supports this feature. After an orderly shutdown of the operating system, the
server will be turned off automatically.
operating system and turn off the server, if your operating system supports this
feature.
power-control button for more than 4 seconds to turn off the server.
the primary node in the partition will start an orderly shutdown of the operating
system and turn off the server.
user interface.
turn off the server.
Advertisement
Table of Contents
