Removing The Top I/O-Panel - Dell XPS 8930 Service Manual

Removing the top I/O-panel

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1 Remove the right-side
2 Remove the front
3 Remove the top
4 Follow the procedure from step 1 to step 2 in
Procedure
1 Disconnect the top I/O-panel cables from the system board.
For more information, see
2 Note the I/O-panel cables routing and remove them from the routing guides next
to the system board on the chassis.
80
computer. After working inside your computer, follow
After working inside your
cover.
bezel.
cover.
"System-board
computer. For more safety best
"Removing the power-supply
components".
Before
www.dell.com/
unit".