Table of Contents
Advertisement
NETGEAR RangeMax Wireless USB 2.0 Adapter WPN111 User Manual
b. Use the
icon to open the Smart Wizard. The Settings tab page opens.
Figure 2-10
2. Configure the Security settings.
a. In the Profile box, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
Note: You will not get a wireless network connection unless the network SSID
c. In the Security section, select WPA2-PSK [AES].
For more about WPA2-PSK, see the link to
3. Save your settings in a Profile.
a. Click the Save Profile button. All the configuration settings are saved in this profile.
b. Click Apply and then click Close to exit the Smart Wizard.
2-14
matches exactly what is configured in the access point.
v2.0, February 2007
"Wireless Communications:" in Appendix
B.
Advertisement
Table of Contents
