Placing The Usb Adapter Cradle - NETGEAR RB-WPN111NA Reference Manual

NETGEAR RangeMax Wireless USB 2.0 Adapter WPN111 User Manual

Placing the USB Adapter Cradle

You can attach the RangeMax WPN111 Wireless USB 2.0 Adapter directly to a USB port on your
computer, or use the USB cable to extend the range and obtain better wireless reception.
Follow these instructions to use the USB cable, plastic cradle, and loop and hook fastener provided
in the package for better USB Adapter placement on a notebook computer:
1. The RangeMax WPN111 Wireless USB 2.0 Adapter comes with three black fasteners. Locate
the one with a prickly side and attach it to the plastic cradle on the middle of the outside rear.
2. Insert the RangeMax WPN111 Wireless USB 2.0 Adapter in the plastic cradle.
Figure 1-9
3. Place one of the other pieces of loop and hook fastener on the back of your monitor near the
top for better reception.
Figure 1-10
Note: The last piece of the fastener can be placed on the side of your PC monitor
nearest your wireless access point, if you are using the USB Adapter with a
desktop PC.
1-10
v2.0, February 2007