Table of Contents
Advertisement
NETGEAR RangeMax Wireless USB 2.0 Adapter WPN111 User Manual
Setting up a Profile to Connect to an Access Point or Router
Follow these instructions to set up the RangeMax WPN111 Wireless USB 2.0 Adapter to connect
to a wireless access point or router.
1. Use the
icon to open the Smart Wizard. The Settings page opens.
Figure 2-4
2. Enter the network settings.
a. In the Network Type section, be sure that Access Point (Infrastructure) is selected.
b. In the Profile box, type the name of the profile.
c. In the Network Name (SSID) field select a network or enter the SSID.
Note: You will not get a wireless network connection unless the network SSID
matches exactly the SSID used by the access point.
3. Save your settings in a Profile.
a. Click the Save Profile button.
All the configuration settings are saved in this profile.
b. Click Apply and then click Close to exit, or Cancel to return to the previous settings.
4. Verify wireless connectivity to your network.
2-6
v2.0, February 2007
Advertisement
Table of Contents
