Wg111T Led; Placing The Usb Adapter Cradle - NETGEAR WG111T User Manual

NETGEAR 108 Mpbs Wireless USB 2.0 Adapter WG111T User Manual
If you right-click in the system tray icon, you can disable the Internet notification feature by
clearing check mark on this line. If you do so, then only the IP address is shown.
Figure 1-7

WG111T LED

The LED on the wireless USB adapter indicates the condition of wireless link.

Placing the USB Adapter Cradle

You can attach the WG111 108 Mbps Wireless USB 2.0 Adapter directly to a USB port on your
computer, or use the USB cable to extend the range and obtain better wireless reception.
Follow these instructions to use the USB cable, plastic cradle, and loop and hook fastener provided
in the package for better USB Adapter placement on a notebook computer:
1. The WG111 108 Mbps Wireless USB 2.0 Adapter comes with three black fasteners. Locate
the one that has a prickly side and attach it to the plastic cradle on the middle of the outside
rear.
2. Insert the WG111 108 Mbps Wireless USB 2.0 Adapter in the plastic cradle.
Figure 1-8
1-10
LED Meaning
Off • The WG111T in not plugged in to the PC.
• Power save mode (default from power up or reset).
Blink Looking for network association.
On Associated or joined with network.
v2.0, February 2007