Lan Server, Os/2 Warp Server Configuration; Server Configuration; Configuration Of An Os/2 Server - Brother HL-4000CN Network User's Manual

LAN Server, OS/2 Warp Server Configuration

Print servers will work with IBM LAN Server, OS/2 Warp Server networks that have
IBM TCP/IP V2.0 or later installed on the file server (TCP/IP is supplied as standard
with LAN Server V4.0 and later as well as Warp Server). Use the following
procedure to configure the print server on an LAN Server or OS/2 Warp Server file
server, or on a OS/2 Warp Connect workstation:

Server Configuration

Make sure that TCP/IP software is installed on your OS/2 file server. If you have not
already done so, open the TCP/IP folder on the desktop, and double click on the
TCP/IP Configuration icon to add the IP address to the OS/2 file server (consult your
system manager for this address).
Refer to the printer User's Guide "1.2 Configuring the Printer on a Network" about
how to configure IP address information using the printer control panel.

Configuration of an OS/2 Server

1. From the OS/2 desktop open the Templates folder. Use the right mouse
2. The Create a Printer window should be open (if it is not, double click on the
3. Type in any name for the printer.
4. Select the default printer driver. If the desired printer driver is not listed,
5. Choose the output port. IBM TCP/IP automatically creates 8 named pipes
Early versions of Warp Server have a bug in which the named pipes do not appear
(the problem does not affect Warp Connect or LAN Server). This problem is fixed
via a patch available from IBM.
button to drag the Printer icon (not the Network Printer icon) onto the
desktop.
printer icon).
click on the Install new Printer Driver button and add the driver.
called \PIPE\LPD0 through to \PIPE\LPD7. Pick an unused port and double
click on it.
2-8