Brother HL-4000CN Network User's Manual page 31

You will get the Settings window. Enter the following:
LPD server
LPD printer
Host name
User
You may leave the other entries blank. Click on the OK button. The pipe should be
highlighted; if not click on it.
Click on the Create button to create the printer.
Open the LAN Services folder and execute the LAN Requester program:
1. Select Definitions
2. Select Aliases
3. Select Printers
4. Select Create. Enter the following:
Alias
Description
Server name
Spooler queue
Maximum number of users
5. Exit the LAN Requester program.
6. You should now be able to print. To test the queue, type the following from
either the OS/2 command prompt or from a DOS workstation:
7. COPY C:\CONFIG.SYS \\servername\alias
8. Where servername is the name of the file server and alias is the alias name
that you specified during this configuration process. This should print the
CONFIG.SYS file on the printer. Note that if you selected a binary service
as the LPD printer name, the lines will be staggered; don't worry about this
because normal DOS, Windows, and OS/2 applications will print OK.
9. The print server will appear as a standard OS/2 printer to application
programs. To make the print server operate transparently with DOS
programs, execute the following command on each workstation:
10. NET USE LPT1: \\servername\alias
11. This will make the printer appear to the software as a printer that is directly
connected to the parallel port of the workstation.
The print server name (from the HOSTS file) or its IP
address.
For most applications, use the print server 'binary' service
BINARY_P1.
The IP name of the OS/2 file server
The IP address of the OS/2 file server
Should be same as the printer name
previously defined
Anything you want
Name of OS/2 server
Name of printer as defined previously
Leave blank unless you want to limit the
number of users
2-9