Associating The Printer; Windows 95/98/Me; Windows Nt4.0/2000/Xp - Brother HL-4000CN Network User's Manual

Associating the Printer

1. You must now create a printer on your Windows 95/98/Me and

Windows 95/98/Me

2. Select Add Printer to begin the printer installation.
3. Click Next when you get the add Printer Wizard window.
4. Select Local Printer when you are asked how the printer is connected to your
5. Select the correct driver. Click Next when you are done.
6. If you have selected a printer driver that is already being used, you have the
7. Select the Brother NetBIOS Port (Port name you assigned in step 7 of the
8. Enter any desired name for the Brother printer and press Next. For example,
9. Windows will now ask you if you wish to print out a test page, select Yes
You are now ready to print. If necessary, you can share the printer on your PC so that
all print jobs are routed through your computer.

Windows NT4.0/2000/XP

2. Select Add Printer to begin the printer installation.
3. Click Next when you get the add Printer Wizard window.
4. Select Local printer (Windows 2000) or Local printer attached to this
5. Select the Brother NetBIOS Port (Port name you assigned in step 6 of the
6. Select the correct driver. Click Next when you are done.
7. If you have selected a printer driver that is already used, you have the option
8. Enter any desired name for the Brother printer and press Next. For example,
9. Select not Shared or Shared and Share Name and press Next.
10. Windows will now ask you if you wish to print out a test page, select Yes
You are now ready to print. If necessary, you can share the printer on your PC so that
all print jobs are routed through your computer.
NT4.0/2000/XP system using the standard Windows printer setup procedure.
To do this, go the Start button, select Setting and then Printers.
computer, and then push Next.
option of either keeping the existing driver (recommended) or replacing it.
Select the desired option and press Next.
Installing the Brother Peer-to-Peer Print (NetBIOS) section) and press Next.
you could call the printer "Networked Brother Printer".
and then select Finish.
computer (XP) when you are asked how the printer is connected to your
computer, and then push Next.
Installing the Brother Peer-to-Peer Print (NetBIOS) section ) and press Next.
of either keeping the existing driver (recommended) or replacing it. Select
the desired option and press Next.
you could call the printer "Networked Brother Printer".
and then select Finish.
4-5