Unix Troubleshooting - Brother HL-4000CN Network User's Manual

UNIX Troubleshooting

1. Make sure that the /etc/printcap file (if applicable) is typed in correctly. In
2. If you are using a Linux operating system, the X-Window Print tool program
3. If you are using a Berkeley-based UNIX, make sure that the daemon is
4. If you are using an AT&T-based UNIX, make sure the printer is enabled
5. Make sure that the lpr/lpd remote line printer service are running on the host
6. If you are using Sun Solaris V2.4 or earlier, there is a bug which causes long
7. If you cannot print from DEC TCP/IP Service for VMS (UCX), make sure
particular, look for missing ":" and "\" characters, because a small error
anywhere in the file can have major consequences. Also check the /usr/spool
directory to make sure that you have created a valid spool directory.
that is included with Linux may not properly configure the etc/printcap file
for lpd operation, then you might also edit the etc/printcap file and change
the following line in the entry for the printer.
if
:lp = /dev/null: \
then to
:lp = :\
started on Berkeley based systems with the command lpc start printer, where
printer is the name of the local print queue.
(enable printer, where printer is the name of the local print queue).
computer (refer to your host computer documentation for information on
how to do this).
print jobs to fail when using a print server. If you are having trouble printing
long jobs (over 1MB), add the line mx#0 to your etc/printcap file entry.
that you have version 2.0B or later of this software, because earlier versions
will not work with print servers.
10-5