Brother HL-4000CN Driver Installation Manual

Color Laser Printer HL-4000CN
Driver Installation Guide
Macintosh ® For Network Users
Before you continue, please make sure that the administrator has configured the network printer settings
correctly by referring to the Network Quick Setup Guide.
Follow the instructions in this guide for your operating system.
Steps 1 to 4 Follow these steps in the Quick Setup Guide first.
LM0110001 Printed in Japan
®
Mac OS 8.6 to 9.2
For
Step 5 Connect the Printer to Your Network
and Install the Adobe PostScript3 PPD File and
AdobePS Driver
Hub
OFF ON
1 Turn off the printer power switch. 2 Connect the network interface cable to the printer,
and then connect it to a free port on your hub.
Macintosh ®
4 Insert the CD-ROM into 5 Double-click the Start Here! icon.
your CD-ROM drive. Follow the instructions on the
screen.
8 Open the Chooser from the Apple menu. 9 Click the AdobePS icon, and then select
BRN_xxxxxx_P1_AT.
Close the Chooser.
* 1 xxxxxx are the last six digits of the Ethernet address. For more information, see Chapter 7 of the Network User's Guide.
©2002 Brother Industries, Ltd. ALL RIGHTS RESERVED
Apple Macintosh, iMac, LaserWriter, and AppleTalk are trademarks of Apple Computer, Inc. Adobe PostScript and PostScript3 are trademarks of Adobe Systems Incorporated.
All other brand and product names mentioned in this guide are registered trademarks of their respective companies.
Users Only
OFF ON
3 Turn on the printer power switch.
6 Click the Install Software icon 7 Follow the instructions on
on the Menu screen. the screen.
The Setup is now complete.
* 1
®
Mac OS X 10.1
For
Step 5 Connect the Printer to Your Network
and Install the Adobe PostScript3 PPD File
Hub
OFF ON
Turn off the printer power switch. Connect the network interface cable to the printer,
1 2
and then connect it to a free port on your hub.
Open the Mac OS X folder. Double-click the
5 6
PPD_Installer.pkg icon.
Follow the instructions on
the screen.
Click the Add Printer button. Select AppleTalk.
10 11
* 2 xxxxxx are the last six digits of the Ethernet address. For more information, see Chapter 7 of the Network User's Guide.
Control Panel
Display
LED indicators Buttons
LEDs
Ready (Green) Lights when the printer is ready to print.
Blinks when the printer is receiving data.
Alarm (Red) Lights when the printer has a problem.
Blinks when the printer has a problem that the user cannot rectify. Contact your dealer or Brother authorized service representative.
Lights when the printer has paper jams. Open the front cover with the indicated button to clear the jamed paper.
Buttons
Print screen mode
Menu Go back to the menu screen mode.
N/A
N/A
Form Feed / Set Force the remaining print data to be output.
Job Cancel / Back Cancel printing.
Users Only
OFF ON
Turn on the printer power
3 4
switch.
Open the Macintosh HD Open the Applications folder.
7 8
icon. Open the Utilities folder.
* 2
Select BRN_xxxxxx_P1_AT , Select Quit Print Center from the Print
12 13
and then click the Add button. Center menu.
The setup is now complete.
Language Setting (Default is English):
When you want to change the language of the control panel message, refer to "Setting Your Language on
the Control Panel" in the Network Quick Setup Guide (the reverse side of the Quick Setup Guide).
For more information, see "CONTROL PANEL" in chapter 5 of the User's Guide on the supplied CD-ROM.
Menu screen mode
Close the menu screen mode and switch to the print screen mode.
Scroll through menus and menu items.
Moves the displayed menu one level down.
Moves the displayed menu one level up.
Select menus and menu items.
Moves the displayed menu one level down.
Sets the displayed parameter.
Moves the displayed menu one level up.
Macintosh ®
Insert the CD-ROM into your CD-ROM drive.
Double-click the HL-4000CN icon.
Open the Print Center icon.
9