Lan Server, Os/2 Warp Server Configuration; Server Configuration; Configuration Of An Os/2 Server - Brother NC-5100h Network User's Manual

LAN Server, OS/2 Warp Server Configuration

Brother print servers will work with IBM LAN Server, OS/2 Warp
Server networks that have IBM TCP/IP V2.0 or later installed on the
file server (TCP/IP is supplied as standard with LAN Server V4.0 and
later as well as Warp Server). Use the following procedure to
configure the print server on an LAN Server or OS/2 Warp Server file
server, or on an OS/2 Warp Connect workstation:

Server Configuration

Make sure that TCP/IP software is installed on your OS/2 file server.
If you have not already done so, open the TCP/IP folder on the
desktop, and double click on the TCP/IP Configuration icon to add
the IP address to the OS/2 file server (consult your system manager
for this address).
Refer to chapter 10 for information on how to assign an IP address
to the printer.

Configuration of an OS/2 Server

1
From the OS/2 desktop open the Templates folder. Use the
right mouse button to drag the Printer icon (not the Network
Printer icon) onto the desktop.
2
The Create a Printer window should be open (if it is not, double
click on the printer icon).
3
Type in any name for the printer.
4
Select the default printer driver. If the desired printer driver is not
listed, click on the Install new Printer Driver button and add the
driver.
2 - 10 TCP/IP PRINTING