Security
ID
_
Using the Operation Panel
Security
The security functions can be set up to protect printer operation and the
print data.
The options available in Security are as follows:
•
ID (Administrator ID input)
•
Password (Administrator password input)
•
I/F Block (Interface (external device) block setting)
•
NetWare (NetWare setting)
•
AppleTalk (AppleTalk setting)
•
IPP (IPP setting)
•
SSL Server (SSL Server setting)
•
IPSec (IPSec setting)
•
Security Level (Security level setting)
1
Press [MENU].
2
Press
or
>
ID (Administrator ID input)
To use the Security function, you must enter an administrator ID. For
information on how to set the administrator ID, refer to Admin
(Administrator settings) on page 2-65.
1
Press
while Security > is displayed.
2
The message display shows ID and a blinking cursor (_).
3
Press
or
blinking cursor. Enter the specified ID. Use
cursor right and left. Enter an ID consisting of between 1 and 16
numbers.
4
Press [OK]. Proceed to the next step Password (Administrator
Password input).
repeatedly until Security > appears.
to increase or decrease, respectively, the value at the
and
to move the
2-57