Print Quality (Setting Print Quality) - Kyocera FS-1370DN Operation Manual

>Code Set
IBM PC-8
>Code Set
? IBM PC-8
>Print Quality
Using the Operation Panel
7
When the desired size is displayed, press [OK].
8
Press [MENU]. The display returns to Ready.
Code Set (Setting the code set)
You can change the character code set. Available character code sets
vary depending on the current font. (The default is IBM PC-8.)
1
Press while Print Settings > is displayed.
2
Press or
3
Press [OK]. A blinking question mark (?) appears.
4
Press or
5
Press [OK].
6
Press [MENU]. The display returns to Ready.

Print Quality (Setting print quality)

In Print Quality menus, you can set the following settings.
The options available in Print Quality are as follows:
• KIR Mode (Selecting the KIR mode)
• EcoPrint Mode (Selecting the EcoPrint mode)
• Resolution (Selecting the Print Resolution)
1
Press while Print Settings > is displayed.
2
Press or
>
KIR Mode (Selecting the KIR mode)
This printer incorporates the KIR (Kyocera Image Refinement)
smoothing function. KIR users the software to enhance resolution,
resulting in high quality printing at resolution of 600 dpi and 300 dpi. The
default is On. KIR has no effect on the printing speed.
1
Press while >Print Quality > is displayed.
2
Press or
repeatedly until >Code Set appears.
until the desired character code set appears.
repeatedly until >Print Quality > appears.
with KIR Off
with KIR On (default)
repeatedly until >>KIR Mode appears.
2-35