Setting Up The Printer To Fax; Choosing A Fax Connection - Oki MB780 User Manual

Setting up the printer to fax

Note: Fax capabilities may not be available on all printer models.
The following connection methods may not be applicable in all countries or regions.
CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up this product
or make any electrical or cabling connections, such as the fax feature, power cord, or telephone, during a lightning
storm.

Choosing a fax connection

You can connect the printer with equipment such as a telephone, an answering machine, or a computer modem.
Note: The printer is an analog device that works best when directly connected to the wall jack. Other devices (such
as a telephone or answering machine) can be successfully attached to pass through the printer, as described in the
setup steps. If you want a digital connection such as ISDN, DSL, or ADSL, a third-party device (such as a DSL filter) is
required.
You do not need to attach the printer to a computer, but you do need to connect it to a telephone line to send and
receive faxes.
You can connect the printer to other equipment. See the following table to determine the best way to set up the
printer.
Equipment
•
The printer
•
A telephone cord
•
The printer
•
A telephone
•
Two telephone cords
•
The printer
•
A telephone
•
An answering machine
•
Three telephone cords
•
The printer
•
A telephone
•
A computer modem
•
Three telephone cords
Benefits
Send and receive faxes without using a computer.
•
Use the fax line as a normal telephone line.
•
Send and receive faxes without using a computer.
Receive both incoming voice messages and faxes.
Send faxes using the computer or the printer.
Additional printer setup
59