No Dial Tone; Queued For Sending - Oki MB780 User Manual

Network indicates that the printer is using the standard network port built into the printer system board. Network
<x> indicates that an internal print server is installed inside the printer or that the printer is connected to an external
print server.
No analog phone line connected to modem, fax is disabled.
The printer is not detecting an analog phone line, so the fax is disabled. Connect the printer to an analog phone line.
No answer
A fax number is dialed, but no connection is made. Wait for the message to clear.

No dial tone

The printer does not have a dial tone. Wait for the message to clear.

Queued for sending

The scanning process of a fax job completed, but the job is not sent yet because another fax job is being sent or
received. Wait for the message to clear.
Ready
The printer is ready to receive print jobs.
Reattach bin <x>
Try one or more of the following:
•
Turn the printer off and then back on.
If the error occurs a second time:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the specified bin.
4
Reattach the bin.
5
Connect the power cord to a properly grounded outlet.
6
Restart the printer.
If the error occurs again:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the specified bin.
4
Contact Customer Support.
•
Touch Continue to clear the message and print without using the specified bin.
Understanding printer messages
235