Panasonic KX-MC6020C Operating Instructions Manual page 67

Feature/Code
Setting the font number in
PCL
{#}{7}{6}{9}
Setting the font pitch/point in
PCL
{#}{7}{7}{0}
Setting the symbol set in PCL
{#}{7}{7}{1}
Setting the line breaks in PCL
{#}{7}{7}{2}
Setting the waiting time for
auto continue mode
{#}{7}{7}{3}
Changing the data timeout
setting
{#}{7}{7}{4}
Detecting monochrome
pages
{#}{7}{7}{5}
Selection
To set the font number to be used in PCL printing. The unit assigns a number
to each font.
1. {Menu} i {#}{7}{6}{9} i {Set}
2. Enter the font number from "000" to "054", using the dial keypad.
L The default setting is "000".
3. {Set} i {Menu}
Note:
L If feature #768 is set to "DOWNLOAD FONT", the default setting is "001".
L To print the font list, see page 104.
To set the font pitch/point to be used in PCL printing.
1. {Menu} i {#}{7}{7}{0} i {Set}
2. Enter the font pitch from "00.44" to "99.99", or the point from "004.00"
to "999.75", using the dial keypad.
L The default pitch is "10.00" and the default point is "012.00".
3. {Set} i {Menu}
To set the symbol set to be used in PCL printing.
1. {Menu} i {#}{7}{7}{1}
2. Press {V} or {^} repeatedly to display the desired symbol set. i {Set}
i {Menu}
To set each behaviour when receiving CR, LF, and FF codes.
{1} "CR/LF/FF" (default): CR=CR, LF=LF, FF=FF
{2} "CR+LF/LF/FF": CR=CR+LF, LF=LF, FF=FF
{3} "CR/CR+LF/CR+FF": CR=CR, LF=CR+LF, FF=CR+FF
To set the length of time before the unit recovers if a memory overflow occurs.
{1} "OFF" (default): Deactivates this feature.
{2} "20s": 20 seconds
{3} "30s": 30 seconds
{4} "60s": 60 seconds
{5} "90s": 90 seconds
{6} "120s": 120 seconds
The unit will automatically print the remaining data in memory when the
computer does not send data to the unit during the set time.
1. {Menu} i {#}{7}{7}{4} i {Set}
2. Enter the desired data timeout setting from "005" seconds to "600"
seconds, using the dial keypad.
L The default setting is "060" seconds.
3. {Set} i {Menu}
{0} "OFF": When you make a colour printout, all pages including monochrome
pages will be printed using colour toner cartridge and colour drum cartridge.
This will increase consumable usage for colour toner cartridge and colour drum
cartridge.
{1} "ON" (default): When you make a colour printout, this feature automatically
detects the monochrome pages of your document and print only using the black
toner cartridge and monochrome drum cartridge. This will decrease
consumable usage for colour toner cartridge and colour drum cartridge, but will
require time to automatically switch between monochrome printing and colour
printing.
Note:
L Depending on the type of document, this feature may not be activated even
when "ON" is selected.
9. Programmable Features
67