Panasonic KX-MC6020C Operating Instructions Manual page 59

Feature/Code
Setting the recording paper
type
{#}{3}{8}{3}
Setting the waiting time for
the power save mode
{#}{4}{0}{3}
Setting the default operation
mode
{#}{4}{6}{3}
Setting the default operation
mode timer
{#}{4}{6}{4}
Cleaning the drum
{#}{4}{8}{0}
Setting toner save feature
{#}{4}{8}{2}
Changing the colour
calibration for all colours
(cyan, magenta, yellow and
black)
{#}{4}{8}{5}
Changing the colour
calibration for cyan colour
{#}{4}{8}{6}
Changing the colour
calibration for magenta
colour
{#}{4}{8}{7}
Selection
{1} "PLAIN PAPER" (default): 75 g/m
{2} "THIN PAPER": 60 g/m
{3} "THICK PAPER": 106 g/m
Note:
L This setting is valid for both the standard input tray and the optional input
tray.
L "THICK PAPER" will be displayed only when "#1" is selected for the
following:
– Paper input tray setting for fax (Feature #440 on page 63).
– Paper input tray setting for copy (Feature #460 on page 65).
– Paper input tray in PCL
– Paper input tray setting for the scan to e-mail print feature (Feature #565
on page 72).
To set the length of time before the unit enters the power save mode.
{1} "5min": 5 minutes
{2} "15min" (default): 15 minutes
{3} "30min": 30 minutes
{4} "1h": 1 hour
Note:
L During the power save mode, the unit needs to preheat the fuser unit before
printing.
To select the default operation mode when the selected time of the mode timer
(feature #464) passes.
{1} "COPY" (default): Copy mode is selected as default.
{2} "FAX": Fax mode is selected as default.
Note:
L You cannot select the scan mode using this feature.
To set the timer before returning to the default operation mode (feature #463).
{0} "OFF": Deactivates this feature.
{1} "30s": 30 seconds
{2} "1min" (default): 1 minute
{3} "2min": 2 minutes
{4} "5min": 5 minutes
Clean the drum cartridge automatically. See page 104 for details.
{0} "OFF" (default): Deactivates this feature.
{1} "ON": The toner cartridge will last longer.
Note:
L This feature may lower the print quality by reducing toner consumption.
Change the colour calibration if colour printing is too dark or too light. See page
77 for details.
Change the colour calibration if colour printing is too dark or too light. See page
77 for details.
Change the colour calibration if colour printing is too dark or too light. See page
77 for details.
9. Programmable Features
2 2
to 105 g/m
2 2
to 74 g/m (16 lb to 19 lb) paper.
2 2
to 165 g/m (29 lb to 44 lb) paper.
®
(Feature #760 on page 66).
(20 lb to 28 lb) paper.
59