Panasonic KX-MC6020C Operating Instructions Manual page 63

Feature/Code
Activating the Distinctive
Ring feature
{#}{4}{3}{0}
Setting the ring pattern for fax
(Distinctive Ring feature)
{#}{4}{3}{1}
Setting auto reduction
feature
{#}{4}{3}{2}
Changing the fax activation
code
{#}{4}{3}{4}
Setting the memory reception
alert
{#}{4}{3}{7}
Setting friendly reception
{#}{4}{3}{8}
Setting the paper input tray to
use for printing received
faxes
{#}{4}{4}{0}
Selection
{0} "OFF" (default)
{1} "ON"
See page 55 for details.
{1} "A"
{2} "B"
{3} "C"
{4} "D"
{5} "B-D" (default)
See page 55 for details.
To receive a fax document that is longer than your recording paper.
{0} "OFF": The unit will print the original size.
{1} "ON" (default): The unit will fit received documents onto your recording
paper.
If you wish to use an extension telephone to receive faxes, activate this feature
and program the activation code.
Important:
L The fax activation code must be different from the code that you
programmed on the answering machine.
{0} "OFF" (default)
{1} "ON"
1. {Menu} i {#}{4}{3}{4}
2. Press {1} to select "ON". i {Set}
3. Enter your code from 2 to 4 digits, using 0–9, {*} and {#}.
L The default code is ";#9".
L Do not enter "0000".
4. {Set} i {Menu}
To alert you with a beeping sound when a received fax document is stored into
memory due to some existing problem.
{0} "OFF": Deactivates this feature.
{1} "ON" (default): You will hear a beeping sound.
Note:
L The slow beeps will continue until you solve the printing problem and make
sure the unit is supplied with enough paper to print the stored document.
To receive a fax automatically when you answer a call and hear a fax calling
tone (slow beep).
{0} "OFF": You have to press {Black} for fax reception.
{1} "ON" (default): You do not have to press {Black} for fax reception.
This feature will be displayed only when the optional input tray is installed.
{1} "#1" (default): Standard input tray
{2} "#2": Optional input tray
{3} "#1+#2"
Note:
L If you select "#1+#2", make sure the same paper size is selected for the
following:
– Standard input tray (feature #380 on page 58)
– Optional input tray (feature #382 on page 58)
If either is changed, "#1" will be selected automatically.
9. Programmable Features
63