Biostar M7VIG PRO Bios Setup Manual page 25

M7VIG Pro BIOS Setup
Wake Up on LAN/Ring
An input signal on the serial Ring Indicator (RI) line (in other words, an
incoming call on the modem) awakens the system from a soft off state.
The Choices: Disabled (default), Enabled.
RTC Alarm Resume
This function is for setting date and time for your computer to boot up. During
Disabled, you cannot use this function. During Enabled, Choose the Date and
Time Alarm:
Date (of Month) Alarm You can choose which month the system will boot
Time (hh:mm:ss) Alarm You can choose shat hour, minute and second the
Note: If you have changed the setting, you must let the system boot
up until it goes to the operating system, before this function work.
Reload Global Timer Events
Reload Global Timer Events are I/O events whose occurrence can prevent the system from
entering a power saving mode or can awaken the system from such a mode. In effect, the
system remains alert for anything, which occurs to a device, which is configured as Enabled,
even when the system is in a power down mode.
VGA
When set to On, any event occurring at a VGA Port will awaken a system which has been
powered down.
The Choices: Off (default), On.
LPT & COM
When this option is set to On, any event occurring at a COM(serial)/LPT (printer) port will
awaken a system which has been powered down.
The Choices: LPT/COM (default), COM, LPT, NONE.
HDD & FDD
When this option is set to On, any event occurring on a hard drive or a floppy drive will
awaken a system which has been powered down.
The Choices: On (default), Off.
PCI Master
When set to On, you need a LAN add-on card which supports the power function. It should
also support the wake-up on LAN jump.
The Choices: Off (default), On.
up.
system will boot up.
24