Integrated Peripherals - Biostar M7VIG PRO Bios Setup Manual

M7VIG Pro BIOS Setup

5 Integrated Peripherals

!
Figure 5. Integrated Peripherals
OnChip IDE Control
The chipset contains a PCI IDE interface with support for two IDE channels.
Select "Enabled" to activate the first and / or second IDE interface. If you install a primary
and / or secondary add-in IDE interface, select "Disabled" to deactivate an interface. If you
highlight the literal "Press Enter" next to the "Onchip IDE Control" label and then press the
enter key, it will take you a submenu with the following options:
On-Chip Primary / Secondary PCI IDE
The integrated peripheral controller contains an IDE interface with support for
two IDE channels. Select Enabled to activate each channel separately.
The Choices: Enabled (default), Disabled.
IDE Prefetch Mode
The "onboard" IDE drive interfaces supports IDE prefetching for faster drive
access. If the interface does not support prefetching. If you install a primary
and/or secondary add-in IDE interface, set this option to "Disabled".
The Choices: Enabled (default), Disabled.
IDE Primary / Secondary Master / Slave PIO
The IDE PIO (Programmed Input / Output) fields let you set a PIO mode (0-4)
for each of the IDE devices that the onboard IDE interface supports. Modes 0
16