Biostar M7VIT Description
Biostar M7VIT Description

Biostar M7VIT Description

Biostar m7vit motherboard: user guide
Hide thumbs Also See for M7VIT:

Advertisement

Quick Links

M
7
V
I
T
M
7
V
I
T
M
7
V
I
T
FCC Statement and Copyright
This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. There is no guarantee that interference will not occur in a
particular installation.
The vendor makes no representations or warranties with respect to the
contents here of and specially disclaims any implied warranties of
merchantability or fitness for any purpose. Further the vendor reserves the
right to revise this publication and to make changes to the contents here of
without obligation to notify any party beforehand.
Duplication of this publication, in part or in whole is not allowed without
first obtaining the vendor's approval in writing.
The content of this user's is subject to be changed without notice and we
will not be responsible for any mistakes found in this user's manual. All the
brand and product names are trademarks of their respective companies.
i

Advertisement

Table of Contents
loading

Summary of Contents for Biostar M7VIT

  • Page 1 FCC Statement and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 2: Table Of Contents

    CPU Installation ... 4 DDR DIMM Modules: DIMM1-2-3 ... 5 Jumpers, Headers, Connectors & Slots ... 7 ESPAÑOL ... 12 Características del M7VIT ... 12 Contenido del Paquete... 13 Disposición del M7VIT ... 14 Instalación de la CPU ... 15 Módulos DDR DIMM: DIMM1-2-3 ...
  • Page 3: English

    English M7VIT Features Use VIA VT8377 (KT400)/ VT8235 Chipset, Winbond W83697HF. Contains on board I/O facilities, which include two serial ports, a parallel port, a PS/2 mouse port, a PS/2 keyboard port, audio ports, USB ports, a game port. Supports Single Socket-A for an AMD Athlon/ Duron Family processor, running at 200/266/333 MHz Front Side Bus frequency.
  • Page 4: Package Contents

    Support Front Audio pin head functions. CMI 8738 Hardware Audio Features (Optional): * 6CH DAC for AC3® 5.1CH purpose. * HRTF-based 3D positional audio, supporting DirectSound™ 3D and A3D™ interface. * Supports 4.1/5.1 speakers, C3DX positional audio in 4/ 6 CH speaker mode.
  • Page 5: Layout Of M7Vit

    Layout of M7VIT JKBV1 JUSBV1 VT8377 JATXPWR1 (KT400) JGAME1 JAUDIO1 Winbond AGP SLOT PCI SLOT BIOS PCI SLOT Codec PCI SLOT PCI SLOT Hardware Audio PCI SLOT CNR1 CNR SLOT IDE1 IDE2 BAT1 PCI1 JCMOS1 PCI2 JUSB2 PCI3 VT8235 JUSB3...
  • Page 6: Cpu Installation

    CPU Installation Pull the lever sideways away from the socket then raise the lever up to 90-degree angle. Locate Pin A in the socket and lock for the white dot or cut edge in the CPU. Match Pin A with the white dot/cut edge then insert the CPU.
  • Page 7: Ddr Dimm Modules: Dimm1-2-3

    DDR DIMM Modules: DIMM1-2-3 DRAM Access Time: 2.5V Unbuffered/ Registered DDR 1600/ 2100/ 2700/ 3200 Type required. DRAM Type: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM Module (184 pin) Only support 4 bank for DDR PC3200 (2pcs Double-Side or 3 pcs Single-Side). DIMM Socket Location DIMM 1...
  • Page 8 How to install a DIMM Module 1. The DIMM socket has a “ Plastic Safety Tab”, and the DIMM memory module has an “Asymmetrical notch”, DIMM memory module can only fit into the slot in one direction. 2. Push the tabs out. Insert the DIMM memory modules into the socket at a 90-degree angle, then push down vertically so that it will...
  • Page 9: Jumpers, Headers, Connectors & Slots

    Peripheral Component Interconnect Slots: PCI1-5 This motherboard is equipped with 5 standard PCI slots. PCI stands for Peripheral Component Interconnect, and it is a bus standard for expansion cards, which has, supplanted the older ISA bus standard in most ports.
  • Page 10 Power Connectors: JATXPWR1 JATXPWR1 JATXPWR1 (ATX Main Power Conn.) (ATX Power Conn.) Wake On LAN Header: JWOL1 Ground 5V_SB Wake up JWOL1 Front USB Header: JUSB2/3 Pin1,2 ==> +5V Pin3,4 ==> Data(-) Pin5,6 ==> Data(+) Pin7,8 ==> Ground Pin9 JUSB2/3 Pin10 ==>...
  • Page 11 Front Panel Connector: JPANEL1 PWR_LED (+) (-) HLED ==> Speaker Conn. HLED ==> Hard Driver LED ==> Reset Button ==> Infrared Conn. ==> Sleep Button PWR_LED ==> Power LED ON/ OFF ==> Power-on Button CPU Clock Selection: JCLK1 Pin 1-2, 5-6 ==> 100 Mhz Pin 2-3, 5-6 ==>...
  • Page 12 Audio Subsystem: JAUDIO1/ JCDIN1 JAUDIO1 JAUDIO1 (Front Audio Header) (Front Audio Header) Pin1 ==> Mic In Pin3 ==> Mic Power Pin5 ==> RT Line Out Pin7 ==> Reserved Pin9 ==> LFT Line Out Pin10 ==> LFT Line Out JAUDIO1 Front Panel Audio Connector/ Jumper Block Pin 5 and 6 Audio line out signals are routed ==>...
  • Page 13: Back Panel Connectors

    Back Panel Connectors JKBMS1 JPRNT1 PS/2 Mouse Parallel JUSB1 PS/2 COM1 COM1 COM1 COM1 Keyboard JCOM1 JGAME1 Game Port Speaker Line In Mic COM2 JCOM2...
  • Page 14: Español

    Español Características del M7VIT Usa Chipsets VIA VT8377 (KT400) / VT8235, Winbond W83697HF. Contiene facilidades I/O integrados en la placa madre en el que incluye dos puertos en serie, un puerto paralelo, un puertos de ratón PS/2, un puerto de teclado PS/2, puertos de audio, puertos USB y un puerto de juego.
  • Page 15: Contenido Del Paquete

    Center a través de la utilidad del audio.) (Opcional). Soporta funciones del cabezal del Audio Frontal. CMI 8738 Características del Hardware Audio (Opcional): * 6CH DAC para AC3® 5.1CH purpose. * HRTF-based 3D audio posicional, soportando DirectSound™ 3D y A3D™ de interface. *...
  • Page 16: Disposición Del M7Vit

    Disposición del M7VIT JKBV1 JUSBV1 VT8377 JATXPWR1 (KT400) JGAME1 JAUDIO1 Winbond Ranua AGP Ranua PCI BIOS Ranura PCI Codec Ranura PCI Ranura PCI Hardware Audio Ranura PCI CNR1 Ranura CNR IDE1 IDE2 BAT1 PCI1 JCMOS1 PCI2 JUSB2 PCI3 VT8235 JUSB3...
  • Page 17: Instalación De La Cpu

    Instalación de la CPU Tire de la palanca del lado del zócalo, luego levante la palanca hasta un ángulo de 90 grados. Sitúe el contacto A del zócalo y busque el punto blanco o corte el borde en la CPU. Empareje el contacto A con el punto blanco/ corte del borde, luego inserte la CPU.
  • Page 18: Módulos Ddr Dimm: Dimm1-2-3

    Módulos DDR DIMM: DIMM1-2-3 DRAM Tiempo de Acceso: 2.5V Unbuffered/ Registered DDR 1600/ 2100/ 2700/ 3200 Tipo requerido. DRAM Tipo: 64MB/ 128MB/ 256MB/ 512MB/ 1GB Módulo DIMM (184 contactos) Solamente soporta 4 bancos para DDR PC3200 (2pcs de DDR de Doble Cara o 3pcs DDR de una cara.) Localización del Módulo DIMM...
  • Page 19 Cómo instalar un Módulo DIMM 1. El zócalo DIMM tiene una lengüeta plástica de seguridad y el módulo de memoria DIMM tiene una muesca asimétrica, así el módulo de memoria DIMM puede caber solamente en la ranura de una sóla dirección. 2.
  • Page 20: Puentes, Cabezales, Conectores Y Ranuras

    Puentes, Cabezales, Conectores y Ranuras Conectores del Disco Duro: IDE1/ IDE2 La placa madre tiene un controlador de 32-bit PCI IDE que proporciona Modo PIO 0~4, Bus Master, y funcionalidad Ultra DMA / 33/ 66/ 100. Tiene dos conectores HDD IDE1 (primario) y IDE2 (secundario). El conector IDE puede conectar a un master y un drive esclavo, así...
  • Page 21 Conector de Corriente: JATXPWR1 JATXPWR1 (Conector de Corriente ATX) Cabezal Wake On LAN: WOL1 Tierra 5V_SB Wake up JWOL1 Cabezal Frontal USB: JUSB2/3 Contacto1,2 ==> +5V Contacto3,4 ==> Dato(-) Contacto5,6 ==> Dato(+) Contacto7,8 ==> Tierra JUSB2/3 Contacto9 Contacto10 ==> NA 5V/ 5VSB Selección para USB/KB: JUSBV1/2/ JKBV1 JUSBV1/2 JKBV1...
  • Page 22 Conector del Panel Frontal: JPANEL1 PWR_LED (+) (-) HLED ==> Conector de Altavoz HLED ==> LED del Disco Duro ==> Boton de Reinicio ==> Conector Infrarojo ==> Boton de Suspension PWR_LED ==> Corriente LED ON/ OFF ==> Boton de Encendido Selección del Reloj del CPU: JCLK1 Contacto 1-2, 5-6 ==>...
  • Page 23 Subsistema de Audio: JAUDIO1/ JCDIN1 JAUDIO1 (Cabezal de Audio (Cabezal de Entrada de Audio Frontal) Contacto1 ==> Mic In Contacto3 ==> Mic Power Contacto5 ==> RT Line Out Contacto7 ==> Reserved Contacto9 ==> LFT Line Out Contacto10 ==> LFT Line Out JAUDIO1 Conector del Panel Frontal de Audio/ Jumper Block Pin 5 y 6...
  • Page 24 Puente de Borrar CMOS: JCMOS1 Contacto 1-2 on ==> Operacion Normal (default) Contacto 2-3 on ==> Borrar Datos CMOS JCMOS1 Conectores del Panel Trasero JKBMS1 JPRNT1 Raton PS/2 Paralelo JUSB1 Teclado COM1 PS/2 JCOM1 JGAME1 Puerto de Juego Salida del Entrada Entrada COM2...
  • Page 25: Warpspeeder

    WarpSpeeder Introduction [ WarpSpeeder™ ], a new powerful control utility, features three user-friendly functions including Overclock Manager, Overvoltage Manager, and Hardware Monitor. The following three sections detail the installation of FastTrak 376 drivers on a system that has Windows 98/Me already installed. If you’re installing the FastTrak 376 drivers on a system during a Windows 98/Me installation, see “Installing Drivers During Windows 98/Me Installation”...
  • Page 26: System Requirement

    System Requirement OS Support: Windows 98 SE, Windows Me, Windows 2000, Windows XP DirectX: DirectX 8.1 or above. (The Windows XP operating system includes DirectX 8.1. If you use Windows XP, you do not need to install DirectX 8.1.) Installation Execute the setup execution file, and then the following dialog will pop up.
  • Page 27 When you see the following dialog in setup procedure, it means setup is completed. If the “Launch the WarpSpeeder Tray Utility” checkbox is checked, the Tray Icon utility and [ WarpSpeeder™ ] utility will be automatically and immediately launched after you click “Finish”...
  • Page 28: Usage

    Usage The following figures are just only for reference, the screen printed in this user manual will change according to your motherboard on hand. [ WarpSpeeder™ ] includes 1 tray icon and 5 panels: 1. Tray Icon: Whenever the Tray Icon utility is launched, it will display a little tray icon on the right side of Windows Taskbar.
  • Page 29 2. Main Panel If you click the tray icon, [ WarpSpeeder™ ] utility will be invoked. Please refer do the following figure; the utility’s first window you will see is Main Panel. Main Panel contains features as follows: a. Display the CPU Speed, CPU external clock, Memory clock, AGP clock, and PCI clock information.
  • Page 30 3. Voltage Panel Click the Voltage button in Main Panel, the button will be highlighted and the Voltage Panel will slide out to up as the following figure. In this panel, you can decide to increase CPU core voltage and Memory voltage or not.
  • Page 31 4. Overclock Panel Click the Overclock button in Main Panel, the button will be highlighted and the Overclock Panel will slide out to left as the following figure. Overclock Panel contains the these features: a. “–3MHz button”, “-1MHz button”, “+1MHz button”, and “+3MHz button”: provide user the ability to do real-time overclock adjustment.
  • Page 32 “Verify button”: User can click this button and [ WarpSpeeder™ ] will proceed a testing for current frequency. If the testing is ok, then the current frequency will be saved into system registry. If the testing fail, system will do a fail-safe rebooting. After reboot, the [ WarpSpeeder™ ] utility will restore to the hardware default setting or load the verified best and stable frequency according to the Recovery Dialog’s setting.
  • Page 33 5. Hardware Monitor Panel Click the Hardware Monitor button in Main Panel, the button will be highlighted and the Hardware Monitor panel will slide out to left as the following figure. In this panel, you can get the real-time status information of your system. The information will be refreshed every 1 second.
  • Page 35 Note: Because the overclock, overvoltage, and hardware monitor features controlled [ WarpSpeeder™ ] divide these features to separate panels. If one chipset is not on board, the correlative button in Main panel will be disabled, but will not interfere other panels’ functions. This property can make [ WarpSpeeder™...
  • Page 36: Trouble Shooting

    Trouble Shooting PROBABLE No power to the system at all Power light don’t illuminate, fan inside power supply does not turn on. Indicator light on keyboard does not turn on PROBABLE System inoperative. Keyboard lights are on, power indicator lights are lit, hard drive is spinning.
  • Page 37: Solución De Problemas

    Solución de Problemas CAUSA PROBABLE No hay corriente en el sistema. La luz de corriente no ilumina, ventilador dentro de la fuente de alimentación apagada. Indicador de luz del teclado apagado. CAUSA PROBABLE Sistema inoperativo. Luz del teclado encendido, luz de indicador de corriente iluminado, disco rígido está...
  • Page 38 10/08/2002...

Table of Contents