Viewing A List Of Attached Devices - NETGEAR WGR614v9 - 54 Mbps Wireless Router Reference Manual

Table 6-3 describes the router statistics.
Table 6-3. Router Statistics
Item
System Up Time
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
Poll Interval
To change the polling frequency, enter a time in seconds in the Poll Interval field, and click
Set Interval.
To stop the polling entirely, click Stop.

Viewing a List of Attached Devices

The Attached Devices screen contains a table of all IP devices that the router has discovered on the
local network. From the main menu of the browser interface, under Maintenance, select Attached
Devices to view the table.
Figure 6-4
Using Network Monitoring Tools
Description
The time elapsed since the router was last restarted.
The statistics for the WAN (Internet) and LAN (Ethernet) ports. For each port, the
screen displays the following:
The link status of the port.
The number of packets transmitted on this port since reset or manual clear.
The number of packets received on this port since reset or manual clear.
The number of collisions on this port since reset or manual clear.
The current transmission (outbound) bandwidth used on the WAN and LAN ports.
The current reception (inbound) bandwidth used on the WAN and LAN ports.
The time elapsed since this port acquired the link.
The intervals at which the statistics are updated in this screen.
v1.1, May 2008
Wireless-G Router WGR614v9 Reference Manual
6-5