Configuring A Device Name; Configuring Lan Tcp/Ip Setup Parameters; Using The Router As A Dhcp Server - NETGEAR WGR614v9 - 54 Mbps Wireless Router Reference Manual

Wireless-g router
Hide thumbs Also See for WGR614v9 - 54 Mbps Wireless Router:
Table of Contents

Advertisement

Wireless-G Router WGR614v9 Reference Manual

Configuring a Device Name

The device name is a user-friendly name for the router. This name is shown in the Network on
Windows Vista and the Network Explorer on all Windows systems. The Device Name field cannot
be blank. The default name is WNR3500.

Configuring LAN TCP/IP Setup Parameters

The router is shipped preconfigured to use private IP addresses on the LAN side and to act as a
DHCP server.
Note: If you change the LAN IP address of the router while connected through the
browser, you will be disconnected. You must then open a new connection to the
new IP address and log in again.
The router's default LAN IP configuration is:
LAN IP address. 192.168.1.1
Subnet mask. 255.255.255.0
These addresses are part of the designated private address range for use in private networks and
should be suitable for most applications. If your network has a requirement to use a different IP
addressing scheme, you can make those changes in this screen.
The LAN IP settings are:
IP Address. The LAN IP address of the router.
IP Subnet Mask. The LAN subnet mask of the router. Combined with the IP address, the IP
subnet mask allows a device to know which other addresses are local to it, and which must be
reached through a gateway or router.

Using the Router as a DHCP Server

By default, the router functions as a DHCP server, allowing it to assign IP, DNS server, and default
gateway addresses to all computers connected to the router's LAN. The assigned default gateway
address is the LAN address of the router. The router assigns IP addresses to the attached computers
from a pool of addresses specified in this screen. Each pool address is tested before it is assigned to
avoid duplicate addresses on the LAN.
For most applications, the default DHCP and TCP/IP settings of the router are satisfactory. Click
the link to the online document
DHCP and information about how to assign IP addresses for your network.
4-2
"TCP/IP Networking Basics" in Appendix B
v1.1, May 2008
for an explanation of
Customizing Your Network Settings

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wgr614 - wireless-g router wireless

Table of Contents