General Setup Menu; Anti-Theft Code - Dual XDVD710 Installation & Owner's Manual

XDVD710
GENERAL Setup - Menu

General Setup Menu

Default anti-theft password
Settings Default
Radio
Clock adjust
Clock Mode
Camera Image Normal
Video Format
TFT Auto Open

Anti-theft Code

Anti-theft active
Load Factory
defaults
Note: Not all GENERAL setup features are described in detail.
1
OPERATION
• Press the GENERAL button to access the GENERAL setup mode
• Select desired parameter you wish to change
• Page will return back to previous screen after 10 seconds of inactivity or
Note:
by pressing the RETURN button
is 0000 GENERAL Setup Menu matrix
Options
USA
S-Amer1
USA
S-Amer
Europe
AM 00:00
1Hr 1Hr
4Hr
Normal
Reverse
Auto
Auto
NTSC
PAL
On
Off
Off
Manual
0000 ----
Off On
Off
Yes Are you
sure?
Yes/Cancel
Set to appropriate setting for your country
See adjusting the clock on page 3 for more details
PM 6:00
18:00
Normal Image
Mirror camera input image 180 degrees
System will auto detect NTSC or PAL
For NTSC compatibility
For PAL compatibility
TFT panel will automatically open when IGN is turned on
TFT panel will not auto open when IGN is turned on
TFT will only open/close when OPEN button is pressed
Must enter password to turn anti-theft on or off
System will require a password if main battery power is
removed for more than 5 minutes
No password will be required if power is removed
Load all factory parameters to their original settlings,
Note: This will not reset the anti-theft password.
Function