Setup Menu - Dual XDVD1002CM Installation & Owner's Manual

XDVD1002CM
General Operation - Setup Menu
Selecting Sources - Main Unit
Selecting Sources - Remote
Display Mode
Setup Menus
General Setup
Speaker Setup
DIVX (R) Registration
10
OPERATION
Press SOURCE on the main unit to select between the following sources:
AUX1 > AUX2 > DVD.
Press SOURCE on the remote to select between AUX1 > AUX2 > DVD.
Adjust volume using VOLUME  /  on the remote (0-16).
Volume
Press MUTE on the remote to silence the audio. Press MUTE or VOLUME  /  to
Mute
cancel.
Press DISPLAY on the remote to select the status of each operating mode (elapsed
Display
time, etc).
Press MODE on the remote to select between the following screen modes:
Full screen displaying 16:9 image.
Zoom display of 4:3 image
Normal display of 4:3 image in the center.
Press SETUP on the remote to select setup menu main page.
Press  or  to select between menu options and press  button on remote
NOTE: To access the Preferences menu, DVD playback must be stopped.
In the GENERAL SETUP menu, the following menus are availble:
NOTE: Select MAIN PAGE from any of the menus to go back to the MAIN PAGE
Select ANGLE MARK from the GENERAL SETUP menu.
Press  to make selection.
Press  or  to adjust (ON/OFF).
Select CAPTIONS from the GENERAL SETUP menu.
Press  to make selection.
Press  or  to adjust (ON/OFF).
Select SCREEN SAVER from the GENERAL SETUP menu.
Press  to make selection.
Press  or  to adjust (ON/OFF).
In the SPEAKER SETUP menu, the following is availble:
Select DOWNMIX from the SPEAKER SETUP menu.
Press  to make selection.
Press  or  to adjust (LT/RT/STEREO).
In the DIVX (R) REGISTRATION menu, the following is availble:
Your unit will display a registration code for DivX Video On Demand.
Go to www.divx.com/vod for additional details. Select DONE to return to the MAIN
PAGE.