Vent Connection - Asko DC7583 Operating Instructions Manual

Installing as a built-in cabinet
Figure 2
1
1
2 6
2 3
Figure 3
1. Pre-drilled holes
2. Securing screws
3. Cover plugs
Min 0,4"
Min 3/8" air gap
Customer Care Center
1-800-898-1879
www.askousa.com

Vent connection

If the drying cabinet is built-in, fit the connector
through the vent opening in the top section of the
recess. The drying cabinet is then installed where
it is to stand.
1. Place the connector over the hole in the drying
cabinet's top panel, align the screw holes, and
secure the connector.
2. Connect the fixed vent pipe if the drying
cabinet is built-in, or attach the supplied (some
markets only) flexible hose. Also see the
"Ventilation options" section.
1
1. Connector
17