Positioning; Level Adjustment; Securing - Asko DC7583 Operating Instructions Manual

Installation

Positioning

1. Place the drying cabinet where it is to stand.
2. Open the door and adjust the level of the drying
cabinet so that it stands firmly on all four feet.
WARNING!
The drying cabinet must be screwed to the wall.
Since the cabinet is top-heavy, there is a risk of
it tipping forward.

Level adjustment

1. Use a spirit level to check that the cabinet
stands level.
2. Use the supplied Allen key and adjust all four
feet through the holes in the drying cabinet's
bottom plate (use pliers if necessary).
3. Insert the four cover plugs (found in the
document bag) in the holes.
1
1. Spirit level
2. Allen key
3. Cover plug, x 4

Securing

1. Place the drying cabinet where it is to stand,
open the door, and pull out the top hanger
section.
2. Mark the drill holes on the wall through the two
pre-drilled holes in the rear panel of the drying
cabinet.
3. Pull the cabinet forward and drill the holes in
the wall for the securing screws. Use the
enclosed plastic plugs or other anchors if
necessary.
3
2
Customer Care Center
1-800-898-1879
www.askousa.com
4. Slide the cabinet back into place and screw it
in position with the supplied screws.
5. Fit the cover plugs.
1
2 6
4
3
2
1. Pre-drilled holes
2. Securing screws
3. Plastic plug
4. Wall behind drying cabinet
5. Rear panel of drying cabinet
6. Cover plug
5
6
15