Color Balance Adjustment; Adjustment Recovery - Xerox 1235/DX - Phaser Color Laser Printer Advanced Features And Troubleshooting Manual

Color Balance Adjustment

†
Press Menu Up or Menu Down until you see:
1
Menus
Color Adjust Menu
2 Press Item Up or Item Down until you see:
Color Adjust
Color Balance
Press Value Up or Value Down until you see:
3
Color Balance
New Value
Values are
0,1,2,3,4,5,6,7, 8,9,10,11,12,13
Press Enter. The Color Adjust Page prints and the front panel displays:
4
Color Adjust Menu
Color Density
5 Repeat Steps 3 and 4 above until you are satisfied with the results.
6 To exit this menu, scroll to Exit with the Item button and select YES with the Value button.
†
Note that the buttons have graphics and numbers only (no written labels) on the 220 V models
of the printer. Please see

Adjustment Recovery

While in the color adjustment routine you can return the values to the factory default
values by using the Color Adjust menu's Color Defaults item.
The printer will be restored to the default values.
Advanced Features and Troubleshooting Manual
=
Front Panel Layout
on page 39 for button numbers and graphics.
Maintaining the Printer
.
77