Duplex Printing
(Printing on Both Sides of the Paper)
The optional duplex unit must be installed in the printer and
enabled before duplex printing can be carried out.
• Standard paper sizes only.
• Paper weight range 20 to 28 lb. US Bond (75 to 105 g/m
• Paper must be loaded print side up.
• Only Tray 1, optional Trays 2 and 3, and the High Capacity Feeder
trays can be used for duplex printing. The Multi-purpose tray
cannot be used for duplex printing.
These instructions explain how to change the settings as
you are printing a job. If you wish to change the settings to
apply to all jobs:
• Click
Start
• Right click the appropriate printer name. then select
Properties.
• Follow steps 3, etc., below: note that the Properties
screen for setting defaults will have more tabs.
→
Settings
Sharp AR-C200P: Windows NT 4.0 Operation • 291
NOTE
NOTE
→ Printers.
²
).