Sharp AR-C200P - Color Laser Printer User Manual page 322

Possible Cause
Parallel cable does
not meet
specifications.
The interface is
disabled.
Configuration
procedure was not
correctly followed or
cancelled.
Parallel cable is
disconnected or
faulty.
A converter, buffer or
extension cable is
being used.
Remedy
Use a bi-directional parallel cable to IEEE 1284–1994
standard.
Check that the parallel interface is set to enable.
Configure again from the beginning.
Reconnect or try another cable.
Test by connecting printer and computer directly.
Sharp AR-C200P: Troubleshooting • 322