Sharp AR-C200P - Color Laser Printer User Manual page 45

Item
MP TRAY USAGE
MEDIA CHECK
TRANSPARENCY
CHECK OHP
RESOLUTION
TONER SAVE
MODE
MONO-PRINT
SPEED
ORIENTATION
LINE PER PAGE
Print Menu (continued)
The default settings are
Value
Normal tray; High
priority tray; Feed
when mismatching;
Do not use
Enable; Disable
Auto; Disable
600 dpi x 1200 dpi
ON; OFF
Auto; color speed;
Normal speed
Portrait; Landscape
5 to 128. Default = 60.
Sharp AR-C200P: Setting up • 45
bold
face.
Description
Specifies MP tray usage.
Normal tray: (Tray select/switch)
Use as a normal tray.
High priority tray: (Valid with Tray
select only). If there is paper in the
MP tray and Duplex is not specified,
the printer uses the MP tray.
Feed when mismatching. When a
paper mismatch occurs (i.e. the
tray's paper size/media type does
not match the print data), a paper
request is issued to the MP Tray. If
the data is for Duplex print, a
specified tray is used instead of the
MP tray.
Do not use. Even if auto switching,
MP Tray will not be used. If MP Tray
is designated in Paper Feed, printer
behaves as though Normal Tray is
selected.
Sets whether the printer checks the
matching of paper size to that of the
tray. Only standard sizes are
checked.
Enable/Disable the transparency
auto detect function.
Selects print resolution.
ON: Enables Toner Save mode.
OFF: Disables Toner Save mode.
Selects monochrome printing speed.
Auto: prints at the most appropriate
speed for page process.
Color: prints always at the color print
speed.
Normal: Always prints at the
monochrome print speed.
Sets page orientation for printing.
Sets the number of lines that can be
printed on a standard letter-size
page. Invalid in PostScript mode.