System Configuration Menu - Sharp AR-C200P - Color Laser Printer User Manual

Item
POWER SAVE
DELAY TIME
PERSONALITY
USB
PS-PROTOCOL
NETWORK
PS PROTOCOL
CLEARABLE
WARNING
AUTO
CONTINUE
MANUAL
TIMEOUT
WAIT TIMEOUT

System Configuration Menu

The default settings are
Value
5 min; 15 min; 30 min;
60 min; 240 min.
Auto emulation;
PCL; IBM PPR III XL;
Epson FX; Adobe
PostScript
ASCII
RAW
ASCII
RAW
On; Job
On; Off
60 sec; 30 sec; Off
Off; 5 sec to 300 sec;
default = 40 sec
Sharp AR-C200P: Setting up • 50
bold
.
Description
Sets the time before printer enters
power save mode.
Selects the printer emulation
language. Note: the only printer
languages that can be selected are
those enabled in the Personality
Maintenance
section of the
menu
.
Specifies PostScript (PS)
communication protocol mode of
data from USB. (In RAW mode,
Ctrl-T is invalid.)
This Item displays only when the
network card is installed.
Specifies PS communication
protocol mode of data from the
network card .
(In RAW mode, Ctrl-T is invalid.)
PCL emulation: Sets the time before
deleting error messages. If changed
to Job, error remains displayed until
next print job is received.
PS emulation: Error messages are
only shown during job regardless of
setting.
Sets the printer to automatically
recover after a memory overflow or
print overrun.
This parameter sets the period of
time, that after requesting paper to
be inserted and is not inserted,
when the print job is cancelled.
Only works in PostScript mode.
Sets the time between receiving the
last byte of data and the page being
automatically ejected.
Only works in PCL mode.
In PS mode the job will be
cancelled.