3. Enter the number of copies and, if required, select Collate.
PostScript Driver
a. Under
Job
b. Enter a job name of up to 16 characters under
Setting
and, if required, select
print
job.
PostScript Driver
c. Type in a four digit personal ID number from 0000 to 7777, then
click OK.
4. Click Print. The document is stored on the hard disk drive, and
one copy is printed for checking.
5. After checking the proof, print or delete (if incorrect) the
remaining copies of the document using the procedures given
below.
Sharp AR-C200P: Windows 2000 Operation • 188
Type, select
Proof and
PCL Driver
Print.
Request Job Name for each
PCL Driver
Job Name