Printing A Stored Print File - Ricoh 9100DN - Aficio SP B/W Laser Printer Software Manual

3. Other Print Operations
• Applications with their own drivers, such as PageMaker, do not support this function.
1. From an application, select a command to print.
The [Print] dialog box appears.
2. Select the printer you want to use in the [Name] list, and then click [Properties].
3. Start printing from the application's [Print] dialog box.
You can select two ways for Stored Print:
3
• [Stored Print]
Stores the file in the printer and print it later using the control panel.
• [Store and Normal Print] (or [Stored and Print])
Prints the file at once and also stores the file in the printer.
For details about configuring the printer drivers, see the relevant Help files.
4. Click [Details...], and then enter a User ID in the [User ID:] box.
You can also set a password. The same password must be entered when printing or deleting.
You can set a file name.
5. Execute a command to print.
The Stored Print job is sent to the printer and stored.

Printing a Stored Print File

1. Press the [Menu] key.
The [Menu] screen appears.
2. Press the [ ] or [ ] key to display [Stored Print], and then press the [
3. Press the [ ] or [ ] key to display [Print One File], and then press the [
The file name and the time when the job was stored appear.
To cancel printing, press the [Escape] key.
4. Press the [ ] or [ ] key to display the file you want to print, and then press the [
key.
If you set a password in the printer driver, a password confirmation screen appears. Enter the pass-
word.
Enter the new number of sets using the [ ] or [ ] key. You can enter up to 999 set.
5. Press the [
The "To print, press [ESC] 1-4 times" message appears. Then the file selection screen reappears.
6. Press the [Online] key.
106
Enter] key.
Enter] key.
Enter] key.
Enter]