Brother HL 5370DW - B/W Laser Printer Network User's Manual page 46

Wireless configuration for Windows
n
If your network is configured for Authentication and Encryption, the following screen will appear. When
configuring your Brother wireless machine, you must configure your machine to match the
Authentication and Encryption settings you wrote down on page 29 for your existing wireless
network. Choose the Authentication Method and Encryption Mode from the pull-down menu in each
setting box. Then enter the Network Key and Confirm Network Key, and then click Next.
Note
• If you want to setup or configure additional WEP key indexes other than WEP key1, click Advanced.
• If you do not know the Authentication or Encryption settings for your network, contact your network
administrator or the manufacturer of your access point/router.
• If you are using WEP and the printed Network Configuration page in o shows Link OK in the Wireless
Link Status, but the machine is not found on your network, make sure you entered the WEP key
correctly. The WEP key is case sensitive.
®
using the Brother automatic installer application (For HL-5370DW)
4
36