Enabling Or Disabling The Wireless Network (For Hl-5370Dw) - Brother HL 5370DW - B/W Laser Printer Network User's Manual

Enabling or disabling the wireless network (For HL-5370DW)

If you want to switch the wireless network to enabled/disabled (disabled is the default), please follow these
steps:
a
Make sure that the power cord is plugged in.
b
Turn on the machine and wait until the machine is in the Ready state.
c
Hold down Go for 10 seconds. Release Go when the printer prints a Network Configuration page that
indicates the current network settings.
Note
If you release Go in less than 10 seconds, the printer will change to the reprint mode.
d
Check the text to the right of IEEE 802.11b/g in the Node Type section. Active means that the wireless
setting is enabled and Inactive means that the wireless setting is disabled.
Note
You can switch the wireless network to enabled/disabled, using the BRAdmin applications or Web Based
Management (web browser). For more information, see Changing the print server settings on page 16.
Control panel features
8
8
119