Creating Csr And Installing A Certificate - Brother HL 5370DW - B/W Laser Printer Network User's Manual

Creating CSR and installing a certificate

How to create the CSR
a
Click Create CSR on the Configure Certificate page.
b
Enter a Common Name and your information, such as Organization. Then click Submit.
Note
• We recommend that the Root Certificate from the CA be installed on your computer before creating the
CSR.
• The length of the Common Name is less than 64 bytes. Enter an identifier such as an IP address, node
name or domain name to use when accessing this printer through SSL/TLS communication. The node
name is displayed by default. The Common Name is required.
• A warning will pop-up if you enter a different name in the URL than the Common Name that was used
for the certificate.
• The length of the Organization, the Organization Unit, the City/Locality and the State/Province is
less than 64 bytes.
• The Country/Region should be an ISO 3166 country code composed of two characters.
c
When the contents of the CSR appear, click Save to save the CSR file to your computer.
d
Now the CSR is created.
Note
• Follow your CA policy regarding the method to send a CSR to your CA.
• If you are using Enterprise root CA of Windows Server
Server of the CertificateTemplate when creating the certificate. For more information, visit us at
http://solutions.brother.com/.
How to install the certificate to your printer
When you receive the certificate from a CA, follow the steps below to install it into the print server.
Note
Only a certificate issued with this printer's CSR can be installed.
a
Click Install Certificate on the Configure Certificate page.
b
Specify the file of the certificate that has been issued by a CA, and then click Submit.
c
Now the certificate is created successfully.
d
Follow the on-screen instructions to configure the other security settings.
e
Restart the printer to activate the configuration.
®
2003/2008, we recommend using the Web
Security features
14
14
14
14
167