Printing The Printer Settings Page - Brother HL 5370DW - B/W Laser Printer Network User's Manual

Printing the Printer Settings Page

Note
Node name: Node name appears on the Printer Settings Page. The default node name of the print server
in the machine is "BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network
(For HL-5370DW).
The Printer Settings Page prints a report listing all the current printer settings including the network settings.
For HL-5350DN and HL-5370DW
You can print the Printer Settings Page using Go of the machine.
a
Make sure that the front cover is closed and the power cord is plugged in.
b
Turn on the machine and wait until the machine is in the Ready state.
c
Press Go three times within 2 seconds. The machine will print the current Printer Settings Page.
Note
If the IP Address on the Printer Settings Page shows 0.0.0.0, wait for one minute and try again.
For HL-5380DN
You can print the Printer Settings Page using the control panel.
a
Press any of the Menu buttons (+, -, Set or Back) of the control panel on your machine.
b
Press + or - to choose INFORMATION.
Press Set.
c
Press + or - to choose PRINT SETTINGS.
Press Set.
Note
If the IP Address on the Printer Settings Page shows 0.0.0.0, wait for one minute and try again.
Control panel features
8
8
8
8
117