Power Lumbar; Heated Seats; Heated And Cooled Seats - Buick ENCLAVE - 2009 Owner's Manual

Hide thumbs Also See for ENCLAVE - 2009:
Table of Contents

Advertisement

1-4
Seats and Restraint System

Power Lumbar

If the seats have power lumbar, the
controls used to operate this
feature are located on the outboard
side of the seats. See "Power
Lumbar" under Power Seats on
page 1-3 for more information.
To increase or decrease lumbar
support, press and hold the front or
rear of the control (C).
Release the control when the
seatback reaches the desired level
of lumbar support.
The lumbar support may need to be
adjusted when changing the
seating position.

Heated Seats

On vehicles with heated front seats,
the controls are located on the center
console. To operate the heated seats
the engine must be running.
I
(Heated Seatback): Press to
turn on the heated seatback.
J
(Heated Seat and Seatback):
Press to turn on or off the heated
seat and seatback.
The light on the button will come on
to indicate that the feature is on.
Each time the button is pressed, the
temperature settings change from
high, to medium, to low, to off.
Indicator lights above the button will
show the level of heat selected:
three for high, two for medium, and
one for low.
The passenger seat may take
longer to heat up.
If the vehicle has remote vehicle
start and is started using the remote
keyless entry transmitter, the front
heated seats will be turned on to the
high setting if it is cold outside. See
"Remote Vehicle Start" under
Remote Keyless Entry (RKE)
System Operation on page 2-3.
When the ignition is turned on, the
heated seat feature will turn off.
To turn the heated seat feature back
on, press the desired button.

Heated and Cooled Seats

If the front seats have the heated
and cooled seat feature, the buttons
used to control this feature are
located on the front doors near the
door handle.
{
(Cooled Seat): To cool the
entire seat, press the button with the
cooled seat symbol.
This symbol will appear on the
climate control display to indicate
that the feature is on. Press
the button to cycle through the
temperature settings of high,
medium, and low and to turn the
cooled seat off. Indicator bars next
to the symbol designate the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Enclave

Table of Contents