Buick ENCLAVE - 2009 Owner's Manual page 317

See When It Is Time for New
Tires on page 5-50 and Wheel
Replacement on page 5-55.
When rotating the vehicle's tires,
always use the correct rotation
pattern shown here.
If the vehicle has a compact
spare tire, do not include it in the
tire rotation.
After the tires have been rotated,
adjust the front and rear inflation
pressures as shown on the Tire
and Loading Information label.
See Inflation - Tire Pressure on
page 5-42 and Loading the
Vehicle on page 4-16.
Reset the Tire Pressure Monitor
System. See Tire Pressure
Monitor Operation on page 5-45.
Make certain that all wheel nuts
are properly tightened. See
"Wheel Nut Torque" under
Capacities and Specifications on
page 5-98.
{
CAUTION
Rust or dirt on a wheel, or on
the parts to which it is fastened,
can make wheel nuts become
loose after time. The wheel
could come off and cause an
accident. When you change a
wheel, remove any rust or dirt
Service and Appearance Care
CAUTION (Continued)
from places where the wheel
attaches to the vehicle. In an
emergency, you can use a
cloth or a paper towel to do
this; but be sure to use a
scraper or wire brush later, if
needed, to get all the rust or
dirt off. See Changing a Flat
Tire on page 5-71.
Make sure the spare tire, if the
vehicle has one, is stored
securely. Push, pull, and then
try to rotate or turn the tire.
If it moves, tighten the cable.
See Storing a Flat or Spare Tire
and Tools on page 5-80.
(Continued)
5-49