Buick ENCLAVE - 2009 Owner's Manual page 213

Storing Name Tags
The system can store up to thirty
phone numbers as name tags
that are shared between the
Bluetooth and OnStar systems.
The system uses the following
commands to store and retrieve
phone numbers:
•
Store
•
Digit Store
•
Directory
Using the Store Command
The store command allows a phone
number to be stored without
entering the digits individually.
b g
1. Press and hold
two seconds. The system
responds with "Ready" followed
by a tone.
2. Say "Store". The system
responds with "Store, number
please" followed by a tone.
3. Say the complete phone number
to be stored at once with no
pauses.
•
If the system recognizes the
number it responds with
"OK, Storing" and repeats the
phone number.
•
If the system is unsure it
recognizes the phone number,
it responds with "Store" and
repeats the number followed
by "Please say yes or
no". If the number is correct,
say "Yes". If the number
is not correct, say "No". The
system will ask for the number
to be re-entered.
4. After the system stores the
for
phone number, it responds
with "Please say the name tag"
followed by a tone.
Instrument Panel
5. Say a name tag for the phone
number. The name tag is
recorded and the system
responds with "About to store
<name tag>. Does that
sound OK?".
•
If the name tag does not
sound correct, say "No"
and repeat Step 5.
•
If the name tag sounds
correct, say "Yes" and
the name tag is stored.
After the number is stored
the system returns to the
main menu.
Using the Digit Store Command
The digit store command allows
a phone number to be stored
by entering the digits individually.
b g
1. Press and hold
two seconds. The system
responds with "Ready" followed
by a tone.
3-95
for