Duplicating An Audio Channel; Volume Rubber Banding - Ulead VIDEOSTUDIO SE User Manual

42
ULEAD VIDEOSTUDIO USER GUIDE

Duplicating an audio channel

Audio files sometimes separate the vocal sound from the
background audio and put them in different channels.
Duplicating an audio channel allows you to mute the
other channel. For example, the voice is on the left audio
channel and the background music on the right. When
you duplicate the right channel, it will mute the vocal part
of the song leaving the background music to play. To
duplicate an audio channel, select Duplicate audio
channel in the Attribute tab in the Options Panel then select which audio
channel to duplicate.

Volume rubber banding

The volume rubber band is the horizontal line in the middle of the track and can
only be seen when you are in Audio View. You can use the rubber band to adjust
the volume of the audio track of video clip and the audio clips in the Music and
Voice tracks.
To adjust the volume level using the rubber band:
1. Click Audio View.
2. On the Timeline, click the track whose volume level you want to adjust.
3. Click a point on the rubber band to add a key frame. This allows you to adjust
the volume level of the track based on this key frame.