Key Frame Settings - Ulead VIDEOSTUDIO SE User Manual

Key frame settings

Key frames are frames in a clip where you can specify a different attribute or
behavior for your video filter. This gives you the flexibility to determine how your
video filter will look like at any point in a clip.
To set key frames for your clips:
1. Drag and drop a video filter from the Library onto a clip in the Timeline.
2. Click Customize Filter. The dialog box for the video filter opens.
Note: Settings available in the dialog box are different for each video filter.
3. In the Key frame controls, drag the Jog Slider or use the arrows to go to the
frame where you'd like to change the attributes of your video filter.
Key frame
Controls
Note: You can use the mouse wheel to zoom in or out of the Timeline Control bar for
precise placement of key frames.
4. Click Add key frame
adjust the video filter settings for that particular frame.
Note: A diamond-shaped mark
indicates the frame is a key frame in the clip.
5. Repeat steps 3 and 4 to add more key frames to your clip.
6. Click OK when finished.
to set that frame as a key frame in the clip. You can
on the Timeline Control bar will appear. This
ULEAD VIDEOSTUDIO USER GUIDE
21