Duplicating An Audio Channel; Volume Rubber Banding - Ulead VIDEO STUDIO 9 User Manual

Tips:
• Click Solo to only play back the audio of the selected track. To play
back specific tracks, click the speaker button beside the track.
• Drag the Pan slider to make the audio only come out of the right or
left speaker of your playback device. This effect is useful in scenes
where two persons are at opposite ends of the screen and are
talking on the phone.

Duplicating an audio channel

Audio files sometimes separate the vocal
sound from the background audio and
put them in different channels.
Duplicating an audio channel allows you
to mute the other channel. For example,
the voice is on the left audio channel and
the background music on the right. When
you duplicate the right channel, it will
mute the vocal part of the song leaving
the background music to play. To
duplicate an audio channel, select
Duplicate audio channel in the Options
Panel then select which audio channel to
duplicate.

Volume rubber banding

The volume rubber band is the horizontal line in the middle of the
track and can only be seen when you are in Audio View. You can
use the rubber band to adjust the volume of the audio track of
video clip and the audio clips in the Music and Voice tracks.
ULEAD VIDEOSTUDIO USER GUIDE
121