Ulead VIDEOSTUDIO SE User Manual page 14

14
ULEAD VIDEOSTUDIO USER GUIDE
To split a clip into two:
1. Select the clip you want to split on the Storyboard or Timeline.
2. Drag the Jog Slider to the point where you want to cut the clip.
Tip: Click
3. Click to cut the clip into two clips. To remove one of these clips, select the
unwanted clip and press [Delete].
To trim a clip with the Trim Handles:
1. Select a clip on the Storyboard or Timeline.
2. Click and drag the Trim handles to set the Mark-in/Mark-out points on the clip.
For more precise trimming, click on a Trim handle, hold it, and use the left or
right arrow keys on your keyboard to trim one frame at a time. .
To trim a clip directly on the Timeline:
1. Click a clip in the Timeline to select it.
or to set the cutting point more precisely.
Trim handles
Mark-in/
Mark-out