Table of Contents
Advertisement
6
.
6
.
2
O
t
h
6
.
6
.
2
O
t
h
Symptom
Cannot print in color
Paper does not feed from
the specified tray
Printing is slow
Unusual noises are
coming from the printer
There is condensation in
the printer
e
r
P
r
o
b
l
e
e
r
P
r
o
b
l
e
Possible Cause
Is the printer driver set to Black/White
printing?
Are the application settings overriding
the printer driver settings?
Is the printer driver color mode set to
color printing even when you are
printing in monochrome?
Is the energy save mode timeout too
short?
Is the printer level?
Is the paper tray properly inserted
into the printer?
Is there paper or a foreign object
jammed in the printer?
m
s
m
s
-
6-16
Action
Change the printer driver settings in
the "Paper/Output" or "Graphics" tab
(Windows), or the "General" dialog
box (Macintosh).
See "Help"
Set the paper tray in the application
to the same paper tray set in the
printer driver.
Change the printer driver settings in
the "Paper/Output" or "Graphics" tab
(Windows), or the "General" dialog
box (Macintosh).
See "Help"
When the printer is in energy save
mode, it takes longer than normal to
begin printing if it receives a print
request. On the control panel, set a
longer energy save mode timeout.
See 5.3 "List of Menu Items"
Reposition the printer on a flat, stable
surface.
See "Safety Precautions"
Push the paper tray completely back
into the printer.
Turn off the printer and remove the
jammed paper or foreign object.
When you cannot remove the
obstruction, turn off the printer and
contact your dealer or Brother
authorized service representative. Do
not attempt to disassemble the
printer.
On the control panel, set the energy
save mode timeout to one hour or
more and leave the printer on.
After leaving the printer for an hour to
allow condensation to dissipate, you
can use the printer normally.
See 5.3 "List of Menu Items"
Advertisement
Table of Contents
