Symptom
(Continued from previous
page)
The Print Ready lamp is
not on or flashing after
executing the print
command
Printouts are not output
from the Printer even
though the Print Ready
lamp is on or flashing
Possible Cause
Is the printer properly configured for
use through a network? (When on a
network.)
The network has a problem. (When
on a network).
Is the printer off?
There may be data remaining in the
printer.
Print the printer configuration list to
check the network settings.
Correct any inappropriate settings.
See "Network User's Guide"
Check that the printer is on and
execute the print command from the
computer one more time.
If the problem persists, consult your
system administrator.
Press the [I] on the power switch to
turn on the printer.
See 3.2.1 "Turn On the Printer"
Cancel printing or force the remaining
data to be printed out.
See "Network User's Guide"
6-4
Action