Brother 4000CN - HL Color Laser Printer User Manual page 126

Color laser printer
Table of Contents

Advertisement

Message
Replace Yellow
Toner (Y)
Reinsert Yellow
Toner (Y)
CTD Sensor
Need Maintenance
Clean Up
CTD Sensor
Regi Jam
Open A-Cover
Fuser Jam
Open A/B-Cover
Duplex Jam
Open B-Cover
Feed Jam
Check Tray
Print Head Cart
ID Error
Meaning and Action
The yellow toner cartridge is empty.
Action:
Replace the yellow toner cartridge.
See 8.1.2 "Replacing the Toner Cartridges"
There is no yellow toner cartridge inserted in the printer or the
cartridge is improperly set.
Action:
Grip the levers at each end of the yellow toner cartridge with
your fingers, then push down firmly to rotate the levers forward to
install the cartridge.
See 8.1.2 "Replacing the Toner Cartridges"
It is time to check the density sensor.
Action:
Remove the transfer roll cartridge and check the cleanliness of
the density sensor.
See 6.10 "Cleaning the Density Sensor"
The density sensor is dirty.
Action:
Remove the transfer roll cartridge and clean the density sensor.
See 6.10 "Cleaning the Density Sensor"
There is paper jammed in the printer.
Action:
Press button A, open the front cover and remove the jammed
media.
Make sure that there is no paper jammed in the paper trays.
See Chapter 7 "Paper Jams"
There is paper jammed in the printer.
Action:
Press button A or B, open the front cover and remove the
jammed media. Make sure there is no paper jammed in the
paper trays.
See 7.4 "Paper Jams Between the Print Head Cartridge and
Fuser Cartridge"
There is paper jammed in the paper rotator used for duplex
printing.
Action:
Press button B, open the front cover and remove the jammed
media.
See 7.5 "Paper Jams in the Paper Rotator"
There is paper jammed in the multi-purpose tray, the paper tray,
or the optional tray module (2 shelves) if installed.
Action:
Pull out the tray and remove the jammed media.
See 7.2 "Paper Jams in Multi-purpose Tray"
See 7.3 "Paper Jams in the Paper Tray"
See 7.6 "Paper Jams in the Tray Module (2 Shelves)"
The print head cartridge is defective.
Action:
Replace the print head cartridge.
See 8.2.2 "Replacing the Print Head Cartridge"
6-18

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hl-4000cn

Table of Contents