Models: 1246, 1247, 1277, 1278, and 1279
|
Home Page
Illustrated Parts Catalog
Removal and Replacement Procedures
Maintenance & Service Guide
Presario Series
|
Notice
|
Preface
|
Removal & Replacement Procedures
Pin Assignments
|
Product Description
|
Battery Pack Operations
|
Troubleshooting
|
Specifications
Removing the Display
Panel Assembly,
continued
6. Disconnect the flex data
cable attached to the display
panel assembly from the Low
Voltage Differential Signal
(LVDS) connector 1 and 2,
or from the CMOS connector 3
on the system board.
The LVDS connector
is used with TFT
display units. The
CMOS connector is
used with HPA
NOTE:
display units.
(Currently, none of
the models in this
series is being
shipped with a TFT
display.)
Next Step